Pyramid Technologies, Inc. PRO-1 Acceptor Programmer

You can update all of your Apex bill acceptors just by connecting the PRO-1 to each acceptor. The stored firmware will transfer to the acceptor automatically!

This is especially useful for vending routes, as it eliminates the need for technicians to carry a PC. The PRO-1 is powered by the acceptor, so there are no batteries to recharge or replace.

The PRO-1 Acceptor Programmer
A simple, pocket-sized, handheld Flash
programmer for Apex Bill Acceptors

Click here for the PRO-1 Operation Manual (PDF)

How does it work?:

The PRO-1 stores the firmware file you wish to use to update your Apex bill acceptors (for example, the new USA $5 bill firmware). To reprogram your Apex bill acceptor, simply plug the PRO-1's 6-pin cable into the FLASH port on the bill acceptor (acceptor must be powered on). The LED on the PRO-1 will begin flashing RED/GREEN for a few moments. When the LED turns solid GREEN, this means the firmware program was successfully transferred to the Apex acceptor. Simply disconnect and move on to the next bill acceptor. The PRO-1 can be pre-loaded with the firmware of your choice when you place your order.

What if I have multiple firmware versions, or I want to change the program stored in the PRO-1?

The PRO-1 also comes with a USB cable that attaches to your Windows PC. Simply install the PRO-1 PC Software and connect the PRO-1 to your PC's USB port. When you run the program, you can select the PDB firmware file you wish to use. It will only take a few moments to transfer the file to the PRO-1. When the LED stops flashing RED/GREEN, the file is transferred, and the PRO-1 is now ready to re-flash your Apex acceptors with the latest firmware you just stored in the PRO-1.